EasyManuals Logo

Triumph Sprint GT User Manual

Triumph Sprint GT
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
46
General Information
Pannier Operation
1. Key slot (shown in the LOCK
position)
2. Lock position symbol
3. Unlock position symbol
4. Release position symbol
To unlock and open the pannier, insert the
key and turn it to the UNLOCK position,
then press down on the latch plate. The lid
can then be opened.
1. L o c k
2. Latch plate
Note:
Due to the effective nature of the
pannier lid seal, reasonable force
may be required to close the lid to
the second latch position.
To close and lock the pannier, close the lid
until the second 'click' is heard. Turn the key
to the LOCK position and remove it.
2
3
4
1
1
cgds
2
Caution
The pannier lid has two latch positions; the
first latch position acts as a safety catch.
Always ensure the pannier lid is fully closed
on to the second latch position, as the
pannier will not fully seal on the first latch
position. Riding the motorcycle with the
pannier lid in this position may allow water
or dust ingress into the pannier, causing
damage to the pannier contents.
Warning
The maximum safe load for each pannier
is 16.5 lbs (7.5 kg). Never exceed this
loading limit as this may cause the
motorcycle to become unstable leading to
loss of control and an accident.
Warning
The two panniers fitted to this motorcycle
are designed to be fitted as a pair. Never
ride the motorcycle with only one pannier
installed. Riding the motorcycle with one
pannier installed may cause the motorcycle
to become unstable leading to loss of
control and an accident.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Sprint GT and is the answer not in the manual?

Triumph Sprint GT Specifications

General IconGeneral
Engine TypeLiquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement1050 cc
Bore x Stroke79 x 71.4 mm
Compression Ratio12.0:1
Fuel SystemMultipoint sequential electronic fuel injection
Final DriveX ring chain
ClutchWet, multi-plate
Gearbox6-speed
Front Tyre120/70 ZR17
Rear Tyre180/55 ZR17
Fuel Tank Capacity20 litres
Max Power130 PS (95.6 kW) @ 9, 200 rpm
Max Torque108 Nm @ 6, 300 rpm
ExhaustStainless steel 3 into 1
FrameAluminium beam
Front Suspension43mm
Rear SuspensionMonoshock with adjustable preload and rebound damping
Front BrakesTwin 320 mm floating discs, Nissin 4-piston calipers
Rear BrakesSingle 255mm disc, Nissin 2-piston caliper
Seat Height815mm
IgnitionDigital inductive type
SwingarmSingle-sided, aluminium alloy
Wheelbase1, 537 mm

Related product manuals