Triumph Sprint GT User Manual

72
Maintenance and Adjustment
Scheduled Maintenance
To maintain the motorcycle in a safe and
reliable condition, the maintenance and
adjustments outlined in this section must be
carried out as specified in the schedule of
daily checks, and also in line with the
scheduled maintenance chart. The
information that follows describes the
procedures to follow when carrying out the
daily checks and some simple maintenance
and adjustment items.
Triumph Motorcycles cannot accept any
responsibility for damage or injury resulting
from incorrect maintenance or improper
adjustment carried out by the owner.
Warning
Special tools, knowledge and training are
required in order to correctly carry out the
maintenance items listed in the scheduled
maintenance chart. Only an authorized
Triumph dealer will have this knowledge
and equipment.
Since incorrect or neglected maintenance
can lead to a dangerous riding condition,
always have an authorized Triumph dealer
carry out the scheduled maintenance of
this motorcycle.
Warning
All maintenance is vitally important and
must not be neglected. Incorrect
maintenance or adjustment may cause one
or more parts of the motorcycle to
malfunction. A malfunctioning motorcycle
may lead to loss of control and an accident.
Weather, terrain and geographical location
affects maintenance. The maintenance
schedule should be adjusted to match the
particular environment in which the vehicle
is used and the demands of the individual
owner.
Since incorrect or neglected maintenance
can lead to a dangerous riding condition,
always have an authorized Triumph dealer
carry out the scheduled maintenance of
this motorcycle.

Triumph Sprint GT Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement	1050 cc
Bore x Stroke	79 x 71.4 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	X ring chain
Clutch	Wet, multi-plate
Gearbox	6-speed
Front Tyre	120/70 ZR17
Rear Tyre	180/55 ZR17
Fuel Tank Capacity	20 litres
Max Power	130 PS (95.6 kW) @ 9, 200 rpm
Max Torque	108 Nm @ 6, 300 rpm
Exhaust	Stainless steel 3 into 1
Frame	Aluminium beam
Front Suspension	43mm
Rear Suspension	Monoshock with adjustable preload and rebound damping
Front Brakes	Twin 320 mm floating discs, Nissin 4-piston calipers
Rear Brakes	Single 255mm disc, Nissin 2-piston caliper
Seat Height	815mm
Ignition	Digital inductive type
Swingarm	Single-sided, aluminium alloy
Wheelbase	1, 537 mm