Troxler 3430 - Unpacking and Inspection

1-6
UNPACKING AND INSPECTION
Upon receipt of the gauge from the factory, a complete inspection
and inventory should be performed. If the shipping case, any other
part of the container, or the gauge appears to be damaged, notify the
carrier and your Troxler Representative immediately.
For shipping to another location or back to the factory, save the box
and any packing material. For shipping instructions and regulations,
please see Appendix D.
Check to see if the following literature and components have been
included:
♦ Manual of Operation and Instruction
♦ Gauge Warranty
♦ Source Certificate
♦ 3430 Gauge
♦ Scraper Plate
♦ Drill Rod
♦ AC Battery Charger
♦ DC Charger/Adapter
♦ One handle lock with keys
Lift the gauge from the case. Inspect the gauge for damage. Check
the lock on the handle. Ensure the keys fit the lock.