Troxler 3430 User Manual

Model 3430
3-7
GAUGE PARAMETER SETUP
After unpacking the gauge and turning it on, there are several
parameters that can be initialized. These parameters do not usually
require changing and include the measurement units and count time.
SETTING MEASUREMENT UNITS
The 3430 gauge allows measurement results to be displayed in
either metric or US units. To set the measurement units, first access
the Special function menu by pressing
〈SPECIAL〉.
Press the down arrow seven times to display:
To select Set Units, press 〈START/ENTER〉.
Use the up and down arrows to scroll through the available units.
When the desired units are displayed, press
〈START/ENTER〉.
– RECALL –
(↑ ↓ or ENTER)
– SET UNITS –
(↑ ↓ or ENTER)
Units: PCF
(↑ ↓ or ENTER)
GAUGE OPERATION

Troxler 3430 Specifications

General

Measurement Principle	Nuclear
Power Source	Rechargeable battery
Display	LCD
Data Storage	Internal memory
Type	Portable
Material Measured	Soil, Asphalt
Moisture Measurement Range	0 to 60%
Operating Temperature	-10 to 50°C
Source	Cesium-137