CAUTIONS AND WARNINGS
Units intended for use in countries that are members of the
European Community are shipped with a CE-approved AC
adapter, Troxler bin number 108354.
Gauge cover is to be removed by trained service personnel
only. There are no user-serviceable components inside. Note
that components behind the cover can have voltage
potentials in excess of 50 volts during normal operation of
the gauge.
Appendix A, Radiation Theory and Safety should be read
carefully and understood before using the gauge.
See page C-8, Alkaline Battery Use.
The source rod should automatically retract to the SAFE
position when the gauge is lifted by the handle.
See page C-12, Tungsten Sliding Block.