Troxler 5850v2 - Unpacking

1–10
UNPACKING
WARNING
The Model 5850v2 Gyratory Compactor weighs
approximately 227 kg (500 lb). To prevent personal
injury or equipment damage, exercise care while
unpacking and lifting the unit.
NOTE
Troxler recommends that all packaging material be
saved. It may be reused to pack the compactor for
shipping.
1
1
.
.
To remove the shipping carton from the top of the unit, cut each
side of the carton approximately 2 inches above the pallet. Lift
the carton up and off the unit.
2
2
.
.
Remove the metal strap and bolts that secure the compactor
to the pallet.
3
3
.
.
Remove the two brackets that secure the front casters in
place. The compactor is now free to roll on the pallet.
WARNING
To prevent personal injury or equipment damage,
do not tip the compactor while lifting it from the
pallet.
4
4
.
.
Using a forklift, lift the compactor from the pallet.
CAUTION
When using a forklift, lift the compactor from the side to
prevent equipment damage.