CALIBRATION
WARNING
To prevent personal injury or equipment damage,
before operating the Model 5850v2 Gyratory
Compactor, become familiar with the safety
warnings on page 1–1.
The Model 5850v2 allows for simple calibration of the compaction
pressure and specimen height, and for offsetting the gyration angle.
To access the Calibration menu, press 5 from the Setup menu
shown on page 3–2. The compactor displays:
-Calibration-
1- Pressure
2- Height
3- Angle Offset
-Calibration-
4- Print Calibration
Use the arrow keys to scroll through the menu options. To select an
option, press the numeric key that corresponds to desired option.
The following sections describe each selection.
To Next Page
Loading...