RESET SOFTWARE
The Reset Software function restores all software functions and
settings to their default (factory) settings.
NOTE
The Reset Software function does not erase data records
or calibration constants stored in the compactor
memory.
To use this function, press 3 from the Special menu shown on
page 5–2. The compactor displays:
System Reset Sets
System Variables to
Defaults! Continue?
<YES> or <NO>
To restore the default settings, press YES. The compactor
restores the default settings, displays a brief confirmation
message, and returns to the Special menu.
To return to the Special menu without restoring the default
settings, press NO/CE or ESC.
To Next Page
Loading...