Troxler 5850v2 - Figure 3-1. Sample Height Versus Gyration Table

Model 5850v2 3–13
3. SETUP MENU


Press 1 to select the Table format. The compactor displays a
brief confirmation message, and then returns to the Data
Output menu.
Figure 3–1. Sample Height Versus Gyration Table


Press 2 to select the formatted data. The data is output in
Comma Separated Variable (.csv) format. The compactor
displays a confirmation message, and then returns to the
Data Output menu.


Press 3 to select GyroPave software compatible data format.
The data is similar to the Table format, but only height
measurements are output. The compactor displays a
confirmation message and then returns to the Data Output
menu.
NOTE
If Thumb Drive is the selected output device, the result
will be the following files: Ax.hdr (header file); Ax.txt
(formatted data format); AxGP.txt (GyroPave data
format); AxTABLE.txt (table data format). (Where “x”
represents the file index number of the data stored in
the compactor’s memory.)