Appendix B–2
MENU MAP DESCRIPTION
Figure B–1 is a map of the compactor’s Setup menu and each of its
submenus. To access the Setup menu, press Setup. Where
applicable, the default (as shipped) menu settings are shown in
shaded text.
The menu map uses indentation to indicate submenus that result
from selection of a menu item. For example, the first eight lines of
Figure B–1 are:
-Setup-
1– View Settings
2- Change Settings
-Change Settings-
1- Operation Mode
-Operation Mode-
1- # Gyrations
2- Specimen Height
This indicates that the first two menu items under the –Setup-
menu are View Settings and Change Settings. When the
Change Settings item is selected, the compactor displays the
Change Settings submenu.
The first menu item under the Change Settings submenu is
Operation Mode. When this item is selected, the compactor
displays the Operation Mode submenu, which has two menu
items, # Gyrations and Specimen Height.
NOTE
The menu map contains only the displays that allow or
require a choice by the operator. Other displays (such as
numerical entries, status information, confirmation
messages, or error displays) are not included.
To Next Page
Loading...