CLOCK/CALENDAR
The compactor stores the gyration data for the last 20 specimens,
using the date and times to identify each specimen. The time and
date of compaction are downloaded with the data.
To set the current time and date, press 1 from the Special menu
shown on page 5–2. The compactor displays the Clock/Calendar
menu shown below. Use the arrow keys to scroll through the menu
options. To select an option, press the numeric key that corresponds
to desired option. The following sections describe each selection.
-Clock/Calendar-
1- Change Time
2- Change Date
3- Time Format
-Clock/Calendar-
4- Date Format
CHANGE TIME
To set the time, press 1 from the Clock/Calendar menu shown
above. The compactor displays:
08:45 AM
Arrows toggle AM/PM
Input Time and
Press <ENTER>
Note that in this example, the time is displayed in AM/PM format.
To change the format, see the Time Format section on page 5–5.
To Next Page
Loading...