5–4
The top line of the display shows the current clock setting. To
accept this setting, press ENTER. The compactor returns to the
Clock/Calendar menu. To change the clock setting, enter the
current time using the numeric keys and press ENTER. The
compactor returns to the Clock/Calendar menu.
NOTE
The hour and minutes must be entered as two-digit
numerals, with leading zeroes as required. For example,
to set the time to 7:06, press 0 7 0 6, and then
press ENTER.
CHANGE DATE
To set the date, press 2 from the Clock/Calendar menu shown
on page 5–3. The compactor displays:
04/08/2009
mm/dd/yyyy
Input Date and
Press <ENTER>
Note that in this example, the date is displayed in mm/dd/yyyy
format. To change the format, see the Date Format section on page
5–5.
The top line of the display shows the current date setting. To accept
this date and return to the Clock/Calendar menu, press ENTER.
To change the date, enter the current date using the numeric keys
and press ENTER. The compactor returns to the
Clock/Calendar menu.
NOTE
The month and day must be entered as two-digit
numerals, with leading zeroes as required. The year
must be entered as a four-digit numeral. For example, to
set the date to April 8, 2009, press 0 4 0 8 2 0
0 9, then press ENTER.
To Next Page
Loading...