Appendix A–8
CLEANING THE COOLING FAN
1. Ensure Cooling Table Fan is powered down.
2. Pull Fan Assembly removal handle and extend fan assembly
REPLACEMENT PARTS
The list below shows part numbers for parts that are replaced often.
Other replacement parts can be ordered by calling 1-877-
TROXLER or visiting our online catalog at www.troxlerlabs.com.
PART # DESCRIPTION
106514 Cable, serial, 8-ft
110697 Cable, USB communications
110665 Gravity extruder
106989 Height standard assembly
116066 Mold assembly, 100 mm
116069 Mold assembly, 150 mm
116901 Model 5850v2 Manual of Operation and Instruction
108664 Power cord, 13 A, 10-ft
116220 Printer, 5850v2
106953 Specimen paper, 150 mm (1 package)
OPTIONAL ACCESSORIES
PART # DESCRIPTION
108706 Pressure Verification Kit
110062 Dynamic Angle Verification (DAV) II with HMS system
116089 Pneumatic Extruder
018141 Bindoff (1 gallon)
012786 Lubricant, Magnalube-G (1-lb can)
018290 Lubricant brush
018682 Heat-resistant gloves
Call GyroImport Software and Operator Manual
Call Shear Measurement Upgrade
To Next Page
Loading...