5–2
SPECIAL MENU
The Special menu provides access to a number of functions that
typically are not used on a day-to-day basis. These functions enable
the operator to set the date and time, to clear all project (specimen)
data, and to reset the software.
To access these functions, press 6 from the Setup menu. The
compactor displays the Special menu shown below.
-Special-
1- Clock/Calendar
2- Erase Records
3- Reset Software
Use the arrow keys to scroll through the menu options. To select an
option, press the numeric key that corresponds to the desired option.
The following sections describe each selection.
To Next Page
Loading...