3–2
SETUP MENU
The compactor’s Setup menu enables the operator to select and
define the operating parameters of an automatic compaction cycle,
to determine the destination and format for outputting or
downloading compaction data, to calibrate the compactor, and to
perform other special functions.
To access the Setup menu, press SETUP on the keypad. Use the
arrow keys to scroll through the menu options. To select an option,
press the numeric key that corresponds to desired option. The
following sections describe each selection.
-Setup-
1- View Settings
2- Change Settings
3- Data Output
-Setup-
4- Home Position
5- Calibration
6- Special
To Next Page
Loading...