TSC ME240 - Page 45

40
This option is used to set delimiter character. Press the button to move the
cursor from left digit to right digit, and press the button to set the value from “0” to
“9” or “A” to “F”. Press the button to set the value into printer. Press
key to cancel the setting and return to the previous menu.
3.1.1-2.13 Media Power Up:
This option is used to set the action of the media when you turn on the printer. Printer
default setting is No Motion. When enter this list, the print mode in the right side of “ >” icon
is the printer current setting. Press and to select the different print mode
and press button to enable the setting. Press key to cancel the
setting and return to the previous menu.
Selections
Description
Feed
Printer will advance one label
Calibration
Printer will calibration the sensor levels, determine length and
feed label
Length
Printer determine length and feed label
No Motion
Printer will not move media
3.1.1-2.14 Head Close:
This option is used to set the action of the media when you close the printhead. Printer
default setting is No Motion. When enter this list, the print mode in the right side of “ >” icon
is the printer current setting. Press and to select the different print mode
and press button to enable the setting. Press key to cancel the
setting and return to the previous menu.
Print Setup 13/17
Format Prefix
Delimiter Char
>
Media Power Up
Media Power U 4/5
Length
>
No Motion
Exit
Print Setup 14/17
Delimiter Char
Media Power Up
>
Head Close
Head Close 4/5
Length
>
No Motion
Exit