TSC ME240 User Manual

42
3.1.2.1 Status
This function is available to check the printer’s sensor status. When enter the [Status] option,
you will see following message.
3.1.2.2 Calibration
This option is used to set the media sensor type and calibrate the selected sensor. We
recommend to calibrate the sensor before printing when changing the media.
Calibration
Exit
↓
Exit
Pre-Printed
Exit
↓
Pre-Printed
↓
↓
Manual
Manual
Manual
↓
↓
↓
↓
Automatic
Automatic
Automatic
Exit
↓
↓
↓
Gap Mode
Bline Mode
Cont. Mode
Paper Len.
812
Gap Size
24
Intensity
3
Ref. Level
512

TSC ME240 Specifications

General

Resolution	203 dpi / 300 dpi
Operating Temperature	5°C to 40°C (41°F to 104°F)
Print Method	Thermal Transfer & Direct Thermal
Interface	USB
Power Supply	AC 100-240V, 50/60Hz
Humidity	20% to 85% RH (non-condensing)