TSC ME240 - Page 57

52
3.1.3.4 Stop Bit(s):
Serial Comm. 4/5
Parity
Data Bits
>
Stop Bit(s)
This option is used to set the RS-232 Stop Bits. The default setting is “1” stop bit. Press
and buttons to select the different Stop Bits and press button
to set the value into printer. When you enter this list, the option in the right side of “>” icon is
the printer current setting. Press key to cancel the setting and return to the
previous menu.
Stop Bit(s) 1/3
>
1
2
Exit