TSC ME240 User Manual

55
3.1.4.2.2 Static IP
Use this menu to set the printer’s IP address, subnet mask and gateway.
Ethernet 2/3
Status
>
Configure
Exit
Press and buttons to select the different options and press
button to enter the option. Press key to cancel the setting and return to the
previous menu.
Press button to move the cursor from left to right digits and press the
button to scroll the value from “0” to “9”. Press button to next setting.
Press the button printer will restart to reset the Ethernet module setting. Press
key to cancel the setting.
Configure 2/3
DHCP
>
Static IP
Exit
IP Address
000.000.000.000
Gateway
000.000.000.000
Subnet Mask
000.000.000.000
Static IP
SELECT: YES
MENU: NO

TSC ME240 Specifications

General

Resolution	203 dpi / 300 dpi
Operating Temperature	5°C to 40°C (41°F to 104°F)
Print Method	Thermal Transfer & Direct Thermal
Interface	USB
Power Supply	AC 100-240V, 50/60Hz
Humidity	20% to 85% RH (non-condensing)