TSC TTP-245 User Manual

29
6.2 Print Quality
Continuous feeding labels
 The printer setting may go wrong. Please do the Initialization and Gap/Black
Mark Calibration.
No print on the label
 Is the label or ribbon loaded correctly? Follow the instructions in Loading the
Paper or Loading the Ribbon.
 Does the ribbon run out? Follow the instructions in Loading the Ribbon.
Poor print quality
 Top cover is not closed properly. Close the top cover completely and make
sure the right side and left side levers are latched to top cover properly.
 Clean the thermal print head.
 Adjust the print density setting.
 Ribbon and paper media are not compatible.

TSC TTP-245 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Processor	32-bit RISC CPU
Max Print Width	108 mm (4.25")
Max Print Speed	5 inches per second
Interface	Parallel
Ribbon Capacity	300 meters
Label Width	1 to 4.4 inches
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)
Power Supply	External Universal Switching Power Supply
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Operating Humidity	25% to 85% non-condensing
Print Length	39.37 inches (1000 mm)
Label Thickness	0.08 to 0.2 mm