TSC TTP-343 Plus - Introduction and Getting Started; Initial Setup Overview

3
1.2. Specification
1.2.1. Printer (TTP-245 Plus / TTP-343 Plus)
Item
Printer model
TTP-245 Plus
TTP-343 Plus
Resolution
203 DPI
300 DPI
Printing method
Thermal Transfer & Direct Thermal
Print speed
2, 3, 4, 5 ips.
2, 3 ips for peel model
2, 3 ips
Max. print width
108 mm (4.25”)
104 mm (4.09”)
Max. print length
2286 mm (90”)
1016 mm (40”)
Enclosure
Double-walled plastic
Physical dimension
314mm (L) x 213mm (W) x 188mm (H)
Ribbon capacity
300 meter, 1” core
Label roll capacity
5” OD
Processor
32-bit RISC high performance processor
Memory
 2MB Flash memory
 8MB DRAM
 SD card slot for memory expansion
Interface
 RS-232 (max. 115200 bps)
 Centronics
 USB 2.0 (Full speed mode)
Power
External universal switching power supply
 Input: AC 100-240V
 Output: DC 24V 3.75A
Operation switch, button
One power switch & feed button
Sensors
 Gap transmissive sensor (offset 6 mm from liner
edge)
 Black mark reflective sensor (position adjustable)
 Head open
 Ribbon end sensor