6 D
AIL
Y M
AINTENANCE
Step 6: Clean the Oven Interior
• S
pray TurboChef ® Oven Cleaner onto the top, bottom, and sides of oven interior.
CAUTION: DO NOT spray Oven Cleaner into the holes on the back oven
wall. D
oing so can damage critical oven components, resulting in a non-
warranty service call.
• Allow Oven Cleaner to penetrate stains for five minutes.
• Clean the oven interior with a nylon scrub pad.
CAUTION: DO NOT attempt to scrub the upper jetplate (Fig B). If food is
stuck to the o
v
en ceiling, gently remove it without applying pressure to the
ceramic plate. B
reakage will result in a non-warranty service call.
CA
UTION: DO NOT remove the top ceramic jetplate (A); breakage will result
in a non-warranty ser
vice call.
Step 7: Clean and Dry the Oven Door
• Clean the o
ven door with Oven Cleaner and a nylon scrub pad.
• Wipe the oven door with a damp towel, and then a dry towel.
S
tep 8: Rinse or Wipe the Oven Interior
CAUTION: DO NOT use a hose or water jet for cleaning. Doing so can damage
critical o
v
en components, resulting in a non-warranty service call.
•
Wipe down the oven interior with a clean damp towel.
• Dry the oven interior with a clean towel.
S
tep 9: Apply TurboChef® Oven Guard - Optional for Easier Maintenance
• Spray TurboChef® Oven Guard onto a clean towel.
• Wipe the interior walls and the inside of the oven door.
CAUTION: DO NOT spray Oven Guard into the cavity, especially around the
holes on the back o
ven wall. Doing so can damage critical oven components,
r
esulting in a non-warranty service call.
Step 10: Reinstall Components
• Reconnect the wire rack to the lower jetplate, and reinstall both items.
• Close the oven door.
• R
einstall the filter
, or replace it with a new one if the mesh is deteriorated, has
large openings, or has star
ted to dislodge fr
om the frame.
S
t
ep 11: Clean the Oven Exterior
• Wipe the oven exterior with a clean, damp towel.
• R
emo
ve the lower panel and remove large food particles.
•
Wipe the panel with a clean, damp towel.
CA
UTION: DO NO
T spray chemicals into any openings, such as the louvers on
the side panels or the r
ear v
ent catalyst housing. Doing so can damage critical
oven components, resulting in a non-warranty service call.
• The oven is ready to turn on.
Up
per
jetpla
te
Step 6 (Fig B)
Step 7
S
tep 8
S
tep 9
S
tep 10
S
tep 11
S
t
ep 6 (Fig A)
To Next Page
Loading...
