Maintenance
Carry out firmware update via FDT/DTM
140
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
12 Maintenance
Ensure that the plug connections and cables are always in good condition.
The devices are maintenance-free, clean dry if required.
12.1 Carry out firmware update via FDT/DTM
The firmware of the device can be updated via FDT/DTM. The PACTware™ FDT frame applica-
tion, the DTM for the device and the current firmware are available as downloads free of charge
from www.turck.com.
NOTICE
Interruption of the power supply during the firmware update
Risk of device damage due to faulty firmware update
Do not interrupt the power supply during the firmware update.
During the firmware update do not reset the power supply.
Example: update the firmware with the PACTware™ FDT frame application
Launch PACTware™.
Right-click Host PC Ò Add device.
Fig.69: Adding a Device in PACTware™
To Next Page
Loading...
