turck TBEN-L 8IOL Series - Commissioning an IO-Link device with IO-Link V1.0

V02.00 | 2019/10
31
8.3 Commissioning an IO-Link device with IO-Link V1.0
IO-Link devices in accordance with IO-Link specification V1.0 do not support data storage. If an
IO-Link V1.0 device is used, data storage at the IO-Link port must be deactivated.
 Set Data storage mode at the port to deactivated, clear.
 Load the parameter changes into the device.
 Connect the IO-Link V1.0 device.
a The LED IOL at the IO-Link port is green, IO-Link communication active.
Fig.30: Example: Deactivate or respectively delete the data storage mode with the DTM