Commissioning
ARGEE/FLC
30
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.1.3 Setting the IP address via the web server
NOTE
To set the IP address via the web server, the device must be in PGM mode.
Opening the web server
Log- in to the web server as administrator. The default password for the web server is
“password”.
Click Station Ò Network Configuration.
Change the IP address and if necessary also the subnet mask and default gateway.
Write the new IP address, subnet mask and default gateway via Submit to the device.
Fig.29: Setting the IP Address via the Web Server
8.2 ARGEE/FLC
The ARGEE FLC programming software can be downloaded free of charge from
www.turck.com .
The Zip archive "SW_ARGEE_Environment_Vx.x.zip" contains the software and the respective
software documentation.
To Next Page
Loading...
Need help?
General
