Commissioning
Read in connected IO-Link devices: topology scan in the DTM
34
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.5 Read in connected IO-Link devices: topology scan in the DTM
The Topology Scan in PACTware allows to read-in of an IO-Link configuration down to the IO-
Link device. IO-Link device, known in PACTware, are added to the IO-Link ports of the master.
Either the respective sensor DTMs in PACTware or the sensor IODDs via IODD DTM Configurator
have to be installed.
Fig.33: PACTware – topology scan
To Next Page
Loading...
