turck TBEN-L 8IOL Series User Manual

V02.00 | 2019/10
91
Bit Designation Meaning Default value
5 Manual setting re-
quires reset
0 = interface can activate changes to link paramet-
ers (auto-negotiate, duplex mode, interface speed)
automatically
1 = device requires a Reset service to be issued to
its Identity Object in order to adapt the changes.
0
6 Local Hardware
Fault
0 = interface detects no local hardware fault
1 = local hardware error detected
0
Common services
Service code Class Instance Meaning
Dec. Hex.
1 0x01 yes yes Get_Attribute_All
14 0x0E yes yes Get_Attribute_Single
76 0x4C No yes Enetlink_Get_and_Clear
8.9.6 VSC-Vendor Specific Classes
In addition to supporting the above named CIP Standard Classes, the device support the
vendor specific classes (VSCs) described in the following.
Class Code Name Description
dec. Hex.
100 0x64 Gateway Class [}92] Data and parameters for the
field bus specific part of the device.
103 0x67 IO-Link Parameter Object
[}93]
ISDU object for acyclic transmission
of parameter data between IO-Link
master and IO-Link device
137 0x89 IO-Link Port Class [}99] Parameters and diagnostics of the IO-
Link channels
138 0x8A IO-Link Events Class [}101] IO-Link Events
153 0x99 Basic Class [}101] Parameters and diagnostics of the di-
gital channels channels
161 0xA1 VAUX Control Class [}103] Parameters and diagnostics for VAUX

turck TBEN-L 8IOL Series Specifications

General

Brand	turck
Model	TBEN-L 8IOL Series
Category	Control Unit
Language	English