EasyManua.ls Logo

turck TBEN-L 8IOL Series - Device Level Ring (DLR)

turck TBEN-L 8IOL Series
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Commissioning
Commissioning the device in EtherNet/IP™
68
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.9.3 Device Level Ring (DLR)
The devices support DLR. The Device Level Ring (DLR)-redundancy protocol is used to increase
the stability of EtherNet/IP™ networks. DLR-capable products provide an integrated switch and
can thus be integrated into a ring topology. The DLR-protocol is used to recognize a ring fault.
If the data line ins interrupted, data are sent through an alternative network section, so that the
network can be reconfigured as soon as possible. DLR-capable network nodes are provided
with extended diagnostic functions which enable the devices to localize errors and thus de-
crease the time for error search and maintenance.
8.9.4 Diagnostic messages via process data
The diagnostic messages of the IO-Link channels are directly mapped into the process data
[}126].
Additionally, the device's status word contains the module diagnostics:
Byte 1 (MSB) Byte 0 (LSB)
Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 bit 4 Bit 3 Bit 2 Bit 1 Bit 0
- FCE - - - - V1 - V2 - - - - - AR-
GEE
DIAG
8.9.5 EtherNet/IP™-standard classes
The modules support the following EtherNet/IP™ Standard Classes in accordance with the CIP
specification.
Class Code Object name
Dec. Hex.
01 0x01 Identity Object [}68]
04 0x04 Assembly Object [}71]
06 0x06 Connection Manager Object [}86]
245 0xF5 TCP/IP Interface Object [}87]
246 0xF6 Ethernet Link Object [}90]
Identity Object (0x01)
The following description of the Ethernet Link Object is taken from the CIP specification, Vol. 2,
Rev. 2.1 by ODVA & ControlNet International Ltd. and adapted to the Turck products.
Instance Attributes
Attr. no. Attribute
name
Get/Set Type Value
Dec. Hex.
1 0x01 Vendor G UINT Contains the manufacturer ID.
Turck = 0x46
2 0x02 Product
type
G UINT Shows the general product type.
Communications Adapter 12
dez
=
0x0C
3 0x03 Product
code
G UINT Identifier for a specific product of a
device type.
default: 27247
dez
= 6A6F

Table of Contents

Related product manuals