turck TBEN-S2-4IOL - Page 91

V01.00 | 2019/10
91
Error code Designation acc. to specification Meaning
0x8020 SERV_NOTAVAIL The service is temporarily not available.
0x8021 SERV_NOTAVAIL_LOCCTRL Service temporarily not available, device is
busy (e. g. teaching or parameterization of the
device at the device active)
0x822 SERV_NOTAVAIL_DEVCTRL Service temporarily not available, device is
busy (e. g. teaching or parameterization of the
device via DTM/PLC etc. active)
0x8023 IDX_NOT_WRITEABLE Access denied, index cannot be written
0x8030 PAR_VALOUTOFRNG Parameter value out of the valid range
0x8031 PAR_VALGTLIM Parameter value above the upper limit
0x8032 PAR_VALLTLIM Parameter value value below the lower limit
0x8033 VAL_LENOVRRUN Length of data to be written does not match
the length defined for this parameter
0x8034 VAL_LENUNDRUN
0x8035 FUNC_NOTAVAIL Function not available in the device
0x8036 FUNC_UNAVAILTEMP Function temporarily unavailable in the device
0x8040 PARA_SETINVALID Invalid parameter: Parameters not consistent
with other parameters in the device.
0x8041 PARA_SETINCONSIST Inconsistent parameters
0x8082 APP_DEVNOTRDY Application not ready, device busy
0x8100 UNSPECIFIC Vendor specific, according to device docu-
mentation
0x8101…
0x8FF
VENDOR_SPECIFIC