MAN205-0195042EN Rev. A Aug. 2011
iii
Table of Contents (Cont.)
4.3.4 Changing Cycle Parameters ------------------------------------------------------ 52
4.3.5 Door Display Function -------------------------------------------------------------- 57
4.3.6 Display During a Cycle -------------------------------------------------------------- 58
5. PRINTER
5.1 Printer Output ------------------------------------------------------------------------------------ 59
5.2 Printer Handling --------------------------------------------------------------------------------- 61
6. STERILIZATION PROGRAMS
6.1 Program Descriptions -------------------------------------------------------------------------- 63
7. PREPARATION BEFORE STERILIZATION -------------------------------------------- 70
7.1 Loading -------------------------------------------------------------------------------------------- 71
7.2 Un-loading ---------------------------------------------------------------------------------------- 72
8. OPERATING INSTRUCTIONS ------------------------------------------------------------- 74
8.1 Failed Cycle -------------------------------------------------------------------------------------- 75
8.2 Aborting a Cycle --------------------------------------------------------------------------------- 76
8.3 Switching to the Internal Steam Generator ----------------------------------------------- 77
SERVICE INSTRUCTIONS
9. MAINTENANCE OF THE AUTOCLAVE
9.1 Preventive and Period ------------------------------------------------------------------------- 80
9.2 Safety Tests after Repair --------------------------------------------------------------------- 84
9.3 General Troubleshooting ---------------------------------------------------------------------- 85
9.4 Steam Generator Troubleshooting --------------------------------------------------------- 90
9.5 Troubleshooting for Water Pump SHURFLO -------------------------------------------- 92
To Next Page
Loading...