MAN205-0195042EN Rev. A Aug. 2011
Page 48 of 137 pages
Testing the In/Out Routine
1. Turn ON the system.
2. Press the OPTION key. The right command key will be called In/Out.
By pressing on this key, the screen displays:
Code:
3. Enter In /Out Test
Code:
4. Enter the code 2ØØ7.
The screen will display the message ‗Digital Ø1 On!!!‘ Be sure that OUTØ1 is ON.
5. Press on ‗UP‘, the screen displays the message ‗Digital OUTØ2 ON!!!‘
Ensure that OUTØ2 is ON.
To Next Page