TVS XL Series User Manual

-11-
KNOW YOUR TVS XL 100
KICKSTARTER LEVER
Warning
Hold the rear brake as a safety precaution while
starting the vehicle to avoid rear wheel rotation and
loss of control.
STANDS
To place the vehicle on center stand (1), hold the
handle bar left grip with the left hand and load
carrier with the right hand.
Place your foot firmly on the center stand
extension (1a) and press with adequate effort.
Ensure both the legs of stand are touching the
ground before placing the vehicle on stand.
TVS XL 100 also has a provision for fixing a side
stand (side stand is optional). Side stand can be
operated with your foot by pushing it away from
the vehicle till it stops.
Please remember that the vehicle can’t be started
even by using kickstarter with the drained battery
fitted in it. Disconnect the battery positive terminal
and tape properly to start the vehicle. Contact TVS
Motor Company Authorised Distributor or Dealer /
Authorised Service Centers immediately**.
Note
The kickstarter lever is located on the right side of
the engine. The engine can be started by kicking
the lever with the ignition key in ‘ON’ position
while applying the rear brake as a safety
precaution.
** Applicable for ‘i-Touch Start’ models only
KNOW YOUR TVS XL 100

TVS XL Series Specifications

General

Displacement	99.7 cc
Maximum Torque	6.5 Nm @ 3500 rpm
Fuel System	Carburetor
Front Brake	Drum
Rear Brake	Drum
Starting Method	Kick Start
Engine Type	Single Cylinder, 4-Stroke
Front Suspension	Telescopic
Rear Suspension	Swing Arm with Hydraulic Shock Absorber
Fuel Tank Capacity	4 liters
Kerb Weight	80 kg
Wheel Type	Spoke
Tyre Type	Tube
Front Tyre Size	2.50 - 16
Rear Tyre Size	2.50 - 16
Seat Height	770 mm
Ground Clearance	150 mm
Transmission	Single Speed Gearless