TVS XL Series User Manual

KNOW YOUR TVS XL 100
1
1a
Warning
Always return the side stand to its full up position
before moving the vehicle.
Caution
Never sit on the vehicle when it is supported by
side stand. Always park the vehicle on a flat, firm
surface.
TOOL BOX
Tool box is located below the seat assembly at the
front end. To access the tool kit, first aid kit, fuse
and battery** the lid tool box need to be opened.
Follow the procedure given below to open the lid:
1. Insert the control key into the lock of lid tool box
and rotate it in anti-clockwise direction. Gently
take out the lid from the tool box.
2. While reassembling locate the lid at the bottom
of the tool box properly, press the top side
firmly and then lock it by rotating the key in
clockwise direction. Take out the key once the
lid is locked.
-12-
Cover tool box
Lid tool box
** Fuse and battery is applicable for ‘i-Touch Start’ models only.
The vehicle’s battery can be accessed only after removing the
cover tool box.
KNOW YOUR TVS XL 100

TVS XL Series Specifications

General

Displacement	99.7 cc
Maximum Torque	6.5 Nm @ 3500 rpm
Fuel System	Carburetor
Front Brake	Drum
Rear Brake	Drum
Starting Method	Kick Start
Engine Type	Single Cylinder, 4-Stroke
Front Suspension	Telescopic
Rear Suspension	Swing Arm with Hydraulic Shock Absorber
Fuel Tank Capacity	4 liters
Kerb Weight	80 kg
Wheel Type	Spoke
Tyre Type	Tube
Front Tyre Size	2.50 - 16
Rear Tyre Size	2.50 - 16
Seat Height	770 mm
Ground Clearance	150 mm
Transmission	Single Speed Gearless