TYAN FT83-B7119 - Page 104

http://www.tyan.com
104
5.3.1 iSCSI Configuration
Please follow the instructions to initiate the iSCSI function.
Step 1.
Select Advanced  CSM Configuration  Network  [UEFI].
Step 2.
Select Advanced  Network Stack Configuration  Network Stack  [Enabled]
Step 3.
Save changes and reboot.
iSCSI Initiator Name
The worldwide unique name of iSCSI Initiator. Only IQN format is accepted.
Enter [iqn.xxx]. xxx ranges from 4 to 223.