TYAN FT83-B7119 - Page 173

http://www.tyan.com
173
NOTE: When CPU Flex Ratio Override set to [Enabled], the following item can be
configured.
CPU Core Flex Ratio
Non-Turbo Mode Processor Core Ratio Multiplier.
23
3.5.5.5.2 Hardware PM State Control
Hardware P-States
Disable: Hardware chooses a P-state based on OS Request (Legacy P-States).
Native Mode: Hardware chooses a P-state based on OS guidance.
Out of Band Mode: Hardware autonomously chooses a P-state (no OS guidance).
Disabled / Native Mode / Out of Band Mode / Native Mode with NO Legacy
Support