TYAN FT83-B7119 - Page 198

http://www.tyan.com
198
Status Code
Description
specific)
0x74
South Bridge DXE initialization (South Bridge module
specific)
0x75
South Bridge DXE initialization (South Bridge module
specific)
0x76
South Bridge DXE initialization (South Bridge module
specific)
0x77
South Bridge DXE initialization (South Bridge module
specific)
0x78
ACPI module initialization
0x79
CSM initialization
0x7A – 0x7F
Reserved for future AMI DXE codes
0x80 – 0x8F
OEM DXE initialization codes
0x90
Boot Device Selection (BDS) phase is started
0x91
Driver connecting is started
0x92
PCI Bus initialization is started
0x93
PCI Bus Hot Plug Controller initialization
0x94
PCI Bus Enumeration
0x95
PCI BUS Request Resources
0x96
PCI Bus Assign Resources
0x97
Console output devices connect
0x98
Console Input devices connect
0x99
Super IO initialization
0x9A
USB initialization is started.
0x9B
USB Reset
0x9C
USB Detect
0x9D
USB Enable
0x9E -0x9F
Reserved for future AMI codes
0xA0
IDE initialization is started