What to do if I see Exhaust TEMP HIGH ALARM on my Ulvac LR Water Pump?
If you see an 'Exhaust TEMP HIGH ALARM' on your Ulvac Water Pump, lower the environment temperature. Additionally, if the exhaust pressure is high (>0.13Mpa), clean and wash the exhaust pipe (Reverse-valve).
What does it mean when my Ulvac LR Water Pump displays RS232C ERROR?
If your Ulvac Water Pump displays an 'RS232C ERROR', it indicates a communication error between the controller and the main PC. Try improving the device side noise environment and strengthening the grounding line.
What does it mean when my Ulvac LR Water Pump displays MBP CURRENT E ALARM?
If your Ulvac Water Pump displays an 'MBP CURRENT E ALARM', it means the inverter alarm has been activated. Turn on the breaker. Avoid exhaust immediately after start-up, because high load operation at startup does not reach the steady rotation within the specified time.
What does it mean when my Ulvac LR displays DRP/MBP CURRENT HIGH ALARM?
If your Ulvac Water Pump displays a 'DRP/MBP CURRENT HIGH ALARM', it indicates an overload of the motor. Clean and wash the piping at the downstream of the pump.
Defines technical terms and hazard levels for warnings.
Explains labels attached to warning locations for safety.
Explains the purpose and application of the LR/HR series pumps.
Describes the pump's capabilities and physical makeup.
Details nitrogen gas and cooling water systems for the pump.
Lists the required utilities and their specifications for pump operation.
Provides detailed dimensions for various pump models.
Explains the functions of the controller buttons and indicators.
Identifies and describes the pump's utility connection ports.
Graphs illustrating pump performance characteristics like speed and current.
General safety precautions for pump installation and operation.
Guidelines for unpacking, transit, storage, and environmental conditions.
Covers requirements for all pump piping connections.
Details on electrical wiring for power and remote control.
Procedures for PC communication setup and connections.
Visual representation of the pump's operational sequence.
Steps to perform before starting pump operation.
How to choose between local and remote control modes.
Procedures for starting and stopping the pump.
How to monitor the pump's current operating status.
Instructions for modifying operational set items.
Details the different operational modes available for the pump.
A list of configurable parameters and their settings.
Explains how the pump monitors itself for abnormalities.
Describes how the pump records operational events and alarms.
Routine checks to perform on the pump and controller.
Recommended schedules for pump overhauling and part replacement.
Identifies common pump symptoms and their corrective actions.
Lists alarm signals and their causes/solutions.
Identifies the specific product covered by the warranty.
Specifies the duration of the product warranty.
Details what is and is not covered by the warranty.
Instructions on contacting ULVAC for service or support.
Additional information regarding contracts and product usage.
Guidance on replacing fuses in CE type pumps.
Diagrams showing RS-232C and RS-485 connector pin assignments.
Lists commands for controlling and monitoring the pump via PC.
General| Brand | Ulvac |
|---|---|
| Model | LR Series |
| Category | Water Pump |
| Language | English |
To Next Page
