How to change the value of ABS with the technical card only:
MENU
Menu selection / Display
+/ -
TURNTABLE SETTING
PRO 3 sec
ABS = 00
PRO
ABS= "00 " blinking
+/-
To change the value
PRO
To valid
MENU
To escape
WARNING:
- In order to the ABS system runs correctly, it is compulsory that the Tango be fitted with the
new larger (35 mm) turntable stop plate (FR2032). If you don’t have the larger turntable stop
plates the machine can work correctly with the smaller ones (but without the ABS advantage)
by programming ABS= - 100.
- The data cards (green ones) delivered with the new versions including ABS system, are not
compatible with the previous versions and reciprocally.
C – 12
To Next Page
Loading...
Need help?
General
