What to do if Uniden Radio scan won't start?
If the scan function on your Uniden Radio isn't starting, make sure you press the [SCAN/SEARCH] button. Also, adjust the squelch threshold and check that the channels you want to scan aren't locked out. Finally, make sure the antenna connection is secure.
Why my Uniden Radio scanner won’t acquire the data channel?
If your Uniden Radio scanner won’t acquire the data channel, adjust the squelch threshold. Also, check your frequency list for the data channel frequency and ensure it is present.
General| Display | Backlit LCD |
|---|---|
| Power Supply | 13.8 VDC |
| Priority Scan | Yes |
| Weather Scan | Yes |
| Alpha Tagging | Yes |
| Modes | AM, FM, WFM |
| GPS | Yes |
| Type | Base/Mobile Scanner |
Key warnings on product usage, modification, legal compliance, and safe operation.
Guidance on preventing memory corruption and handling scanner power behavior.
How to initiate, manage, and select systems and groups for scanning.
Settings for systems, sites, channels, groups, and their basic parameters.
Specific programming steps for Motorola, EDACS, and LTR trunked systems.
Steps for editing channel names, frequencies, talk group IDs, and audio types.
Performing searches, editing ranges, and integrating searches with scanning.
Automatically searching and storing found frequencies or IDs.
Configuring Close Call modes, alerts, pause settings, and managing hits.
Connecting a GPS device and enabling location-based system locking/unlocking.
Common operational problems and their suggested solutions.
To Next Page
