Charging the Battery Pack
Use the AC Adapter/Charger to power the UBC 245XLT
from an AC outlet.
You can use your scanner while the battery charges. To
fully charge the battery, leave the AC Adapter/Charger
connected for 14 — 16 hours.
Note: Disconnect the AC Adapter/Charger from the unit
when charging is complete.
Low Battery Indicator
When the Battery Pack is low and needs to be charged,
the battery icon appears in the display. You will also hear
a beep every 15 seconds as an audible alert.
12
To Next Page
Loading...
Need help?
General