Programming Scan Lists During Search
To select a Scan List location and store an ID during
Search mode, follow these steps:
1. When your scanner
stops on an ID you
want to store, press
.
2. Use or
to select the Scan List
memory location you
want, then press .
3. Press to return to
Trunk Tracking
Search mode.
To let your scanner automatically store an ID in an
available Scan List location, follow these steps:
1. Press when your
scanner stops on an
ID you want to store.
2. Press to return to
Trunk Tracking
Search mode.
Deleting a Stored ID
To delete a stored ID:
a. Press .
b. Then press .
54
To Next Page
Loading...
Need help?
General