Uniden UBC 245XLT Trunk Tracker II - Channel Lockout

Delay in Manual Mode
1. Press .
2. Select the channel
that you want by
entering the number
and press .
Press and
DLY
displays indicating the
scanner will pause on
the channel when a
transmission is
received.
Channel Lockout
You can lockout any channel so it is not reviewed during
normal scanning. You can restore the channel to scanning
whenever you wish.
Lockout in Manual Mode
1. Press .
2. Select a channel.
Enter the channel
number.Press
again.
OR
Press or
to change higher, or
to lower
the channel.
3. Press to lockout
the channel.
L/O appears
in display.
23
12345678910
12345678910