SVC Scan Lockout
Follow these steps to lockout frequencies during Service
scanning:
1. Press to stop
the Service Scan.
2. Press .
3. Press to resume
scanning.
Note: You can lockout up to 20 frequencies in SVC
Scan mode. The 21st locked out frequency
entered causes the first locked out frequency to
unlock.
To cancel the lockout.
1. Press to stop
the Service Scan.
2. Locate the lock-out frequency using ▲/▼.
3. Press again.
To restore all lockout frequencies, press and hold for
about two seconds. You will hear two beeps when all
frequencies have been restored.
To Next Page
Loading...
Need help?
General