Uniden UBC 245XLT Trunk Tracker II User Manual

Search Hold Feature
1. Press at
anytime to stop the
search.
2. Press to
move to the next
higher frequency.
OR
Press to
move down to the
previous frequency.
3. Press to resume
searching.
Data Skip
A scanner will normally stop on any transmission it
receives.Thismeansthe
UBC245XLT willstopondata
signals and unmodulated transmissions. You can
automatically skip many of these types of transmissions
during searches.
1. Press to activate
the data skip feature.
The indicator
appears on the
display.
2. Press again to
cancel the data skip
feature.
The indicator
disappears from the
display.
When data skip is active, your scanner may pause
momentarily on an unwanted signal but will resume
searching in 2 or 3 seconds. Data Skip does not function
when the AIR Band is selected.
29
12345678910
12345678910
12345678910
12345678910
12345678910

Uniden UBC 245XLT Trunk Tracker II Specifications

General

Brand	Uniden
Model	UBC 245XLT Trunk Tracker II
Category	Scanner
Language	English