EasyManuals Logo

Uniden UBC 245XLT Trunk Tracker II User Manual

Uniden UBC 245XLT Trunk Tracker II
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Precautions
Before you use this scanner, please read and observe the following:
EARPHONE WARNING!
Be sure to use only the recommended optional monaural earphone
(EP009). You may also use a 32 stereo headset. Use of an incorrect
earphone or stereo headset may be potentially hazardous to your
hearing. The output of the phone jack is monaural, but you will hear in
both headphones of a stereo headset.
Set the volume to a comfortable audio level coming from the speaker
before plugging in the monaural earphone or a stereo headset of
proper impedance (32). Otherwise you might experience some
discomfort or possible hearing damage if the volume suddenly
becomes too loud because of the Volume Control or Squelch Control
setting. This may be particularly true of the type of earphone that is
placed in the ear canal.
WARNING!
Uniden does not represent this unit to be waterproof. To reduce the
risk of fire or electrical shock, do not expose this unit to rain or
moisture.
GENERAL BATTERY WARNING!
Do not short-circuit any Battery.
Do not discard Batteries in a fire; they may explode.
Nickel-Cadmium Battery Warning
When using Nickel-Cadmium Batteries with this product, take note of
the following warnings:
Do not charge Nickel-Cadmium Batteries with any charger other than
the one supplied with this product. Using another charger may damage
the Batteries, or cause them to explode.
i

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uniden UBC 245XLT Trunk Tracker II and is the answer not in the manual?

Uniden UBC 245XLT Trunk Tracker II Specifications

General IconGeneral
BrandUniden
ModelUBC 245XLT Trunk Tracker II
CategoryScanner
LanguageEnglish

Related product manuals