VIRDI 4000 User Guide
21
Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr
If you hear a “ppiririck” buzzer sound, registration is successful. If they are
different, you will hear a “ppibig” buzzer sound indicating failure and the “1.Add”
menu screen appears.
3.3.1.3. “3. FP|PW” registration
Fingerprint and password registration, and fingerprint or
password authentication
◆
[ENTER] [1] [1] User ID [ENTER] [3] Input PW [ENTER]
Input same PW [ENTER] 1:1 Level [ENTER] Enable 1:N [ENTER]
Input FP Input same FP
◆
After fingerprint registration (refer to ① “1. FP” registration), password
registration (refer to ② “2. ID&PW” registration) follows.
If you hear a “ppiririck” buzzer sound, registration is successful. If they are
different, you will hear a “ppibig” buzzer sound indicating failure and the “1.
Add” menu appears.
3.3.1.4. “4. FP&PW” registration
Fingerprint and password registration, and fingerprint and password
authentication
◆
[ENTER] [1] [1] User ID [ENTER] [4] Input PW [ENTER]
Input same PW [ENTER] 1:1 Level [ENTER] Enable 1:N [ENTER]
Input FP Input same FP
◆
After fingerprint registration (refer to ① “1.FP” registration), password
registration (refer to ② “2. ID&PW” registration) follows.
3.3.1.5. “5. RF” registration
Card registration and card authentication
◆
[ENTER] [1] [1] User ID [ENTER] [5] Place the card
◆
<Add Card>
Place Your Card
To cancel registration, press the [#] button.
If a user places the card close to the unit, a “ppiririck” buzzer sound
(registration is successful) will be heard and the “1. Add” menu appears.
To Next Page
Loading...
Need help?
General
