VIRDI 4000 User Guide
8
Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr
== 00:00
- A registered user tried authentication
when entry/exit is not allowed.
== 00:00
- Waiting for a reply from the server
for authentication
== 00:00
- Terminal is locked
- No meal time even though the unit is set to meal
control mode
== 00:00
- Terminal program upgrade
(Power switch should not be turned off when this
message is displayed.)
1.5. Voice information during operation
“Please enter your fingerprint”
Enter fingerprint using the fingerprint input
window
“You are authorized” Authentication successful
“Please try again” Authentication failed
1.6. Buzzer sound during operation
“ppig”
When a button is pressed or a card is being read
When fingerprint input is completed, allowing the user to
remove his fingerprint
“ppibig” Authentication failed or wrong user input
“ppiriririck” Waiting for fingerprint input
“ppiririck”
Authentication successful or settings for the current user are
completed
1.7. LED signal during operation
POWER LED : Power on/off
DOOR LED : Door open/close
CARD LED : Card contact
To Next Page
Loading...
