Union Community Virdi 4000 User Guide

VIRDI 4000 User Guide 55
Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr
4.1.7. Multiple fingerprint authentication
For a door to which a higher level of security is required, multiple fingerprints
from more than 2 people are assigned to a single ID. The door opens only
when all the registered fingerprints are authenticated.
In the menu, set as below:
3. Option setting  2. Authentication method settings  <1:N authentication
>=0  < multiple fingerprint authentication >=1
For example, if the ID ‘0001’ is registered with 3 fingerprints, all 3 fingerprints
must be authenticated after ID input to enter through the door. A single failure in
the middle renews the authentication process. This iterative process continues
until all 3 fingerprints are authenticated.
⑤ If the user ID is ‘0001’, enter ‘1’ or ‘0001’ and press the function key. The light
on the fingerprint input window turns on together with the voice message
“Please enter your fingerprint.” (during auto sensing, fingerprint input alone is
sufficient). When a fingerprint is entered, the authentication result will be
displayed on the LCD window.
== 00:00
0001
If the user ID is ‘0001’, enter ‘0001’ and press the
function key.
▼
== 00:00
When the light on the fingerprint input window turns
on together with the voice message “Please enter
your fingerprint”, enter your fingerprint and hold it
there until you hear a “ppig” buzzer sound.
▼
== 00:00
If authentication is successful, you will hear a
“ppiririck” buzzer sound and the light on the
fingerprint input window turns on together with the
voice message “Please enter your fingerprint”. This
iterative process continues until all entered
fingerprints have been authenticated.
▼
== 00:00
If authentication is successful, you will see a success
message on the LCD together with the voice
message “You are authorized”. The door relay and
LED turn on.
The default screen appears after 1~2 sec., and the
door relay and LED turn off when the door open
setting time has elapsed.
※ Error message: the same as the error with [1:1] authentication
4.2. Time attendance control

Union Community Virdi 4000 Specifications

General

Brand	Union Community
Model	Virdi 4000
Category	IP Access Controllers
Language	English