Union Community Virdi 4000 User Guide

VIRDI 4000 User Guide 54
Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr
4.1.6. User ID group authentication
Authentication is done with the first digits (at least one digit) of the user ID
instead of all the digits of the user ID. It is more convenient than 1:1
authentication. This is used when 1:N cannot be used because there are too
many users or when 1:N authentication is too slow.
In the menu, set as below:
3. Option settings  2. Authentication method settings  <1:N
authentication>=1  <ID group authentication >=1
For example, for a user whose ID is ‘1234’, enter only ‘12’ for authentication,
then only the fingerprints of users starting with ‘12’ (1200~1299 users) are
searched. If the ID is ‘0012’, enter ‘0012’ or ‘00’ for authentication.
== 00:00
12
If the user ID is ‘1234’, enter ‘1’, ‘12’, or ‘123’, and
then press the function key.
▼
== 00:00
When the light on the fingerprint input window turns
on together with the voice message “Please enter
your fingerprint”, enter your fingerprint and hold it
there until you hear a “ppig” buzzer sound.
▼
== 00:00
If authentication is successful, you will see a success
message on the LCD together with the voice
message “You are authorized”. The door relay and
LED turn on.
The default screen appears after 1~2 sec., and the
door relay and LED turn off when the door open
setting time has elapsed.

Union Community Virdi 4000 Specifications

General

Brand	Union Community
Model	Virdi 4000
Category	IP Access Controllers
Language	English