Union Community Virdi 4000 User Guide

VIRDI 4000 User Guide 38
Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr
time(5sec~30sec). If so, it makes an alarm sound.
If this is set to ‘00’, there is no alarm sound.
This alarm helps the relevant person check what has caused the problem in a
timely manner and eliminate the problem.
For this function, the lock shall be able to monitor whether the door is open or
closed and its monitoring pin shall be connected to the terminal. The door
open check shall be set to ‘1’ or ‘2’ for this operation.
Once the setting is complete, press [ENTER] to move to the upper setting.
3.5.4. Volume settings
In the main menu, press [3] to select “3. Option”, and the following screen
appears:
1. Application
2. Verify Option
3. Set Doorlock
4. Sound Control
5. Time Setting
6. Other Setting
Press [4] for volume settings.
3.5.4.1. Voice settings
<Use Voice>
(N=0/Y=1):1
Default setting: ‘1’
To make voice information available, set it to ‘1’. If not, set it to ‘0’.
Press [ENTER] to move to the next setting.
3.5.4.2. Buzzer volume settings
<Beeper volume>
(0-2):1
Default setting: ‘1’
This controls the terminal buzzer volume. If this is set to ‘0’, there is no buzzer
sound. ‘1’ means low volume, and ‘2’ means high volume.
Press [ENTER] to move to the next setting.
3.5.4.3. Case open alarm settings

Union Community Virdi 4000 Specifications

General

Brand	Union Community
Model	Virdi 4000
Category	IP Access Controllers
Language	English